室温铁磁性Sr3YCo4O10.5+δ多晶有序化的烧结工艺及电磁性能

采用固相反应法制备了不同烧结温度(950~1 180 ℃)、烧结时间、烧结次数共7种工艺的Sr₃YCo₄O_10.5+δ多晶块材,通过热分析、XRD、SEM确定了有序化相变和最佳烧结工艺(1 180 ℃/24 h+1 180 ℃/24 h),并研究了多晶的电磁性能。结果表明,964 ℃完全晶化的四方相Sr₃YCo₄O_10.5在1 042 ℃吸氧(δ)完成有序化,生成Sr₃YCo₄O_10.5+δ,而1 100 ℃和1 180 ℃烧结的样品均出现(103)、(215)超结构峰,验证了其结构的有序性。块材均呈半导体电输运行为,二次烧结晶格完整性提高,晶粒长大,300 K时电阻率仅为0.06 Ω·cm,居里温度(T_c)~335 K,零场冷曲线(ZFC)上的Hopkinson峰源于低温时被冻结的磁矩随温度升高转向磁场方向,磁化强度在298 K达到最大,随后受热扰动的影响减小。室温铁磁性源于有序结构导致的中自旋或高自旋态Co³⁺的e_g轨道有序。     

THE DETERMINATION OF THE COMPUTATIONAL DEGREES OF FREEDOM OF BAR SYSTEMS1)

为了简化和统一结构力学教材中杆件体系计算自由度$W$的算法,本文提出了“直接法”。该方法以相邻节点间的杆件和结点为分析对象,对于含$m$根杆件、$g$ 个单刚结点和$h$个单铰结点的平面杆件体系,直接法给出计算自由度公式$W=3m-(3g+2h$)。相比于已有方法,直接法研究对象清晰,数学运算统一,适合于编程计算,便于初学者准确而快速计算复杂体系的$W$;也为结构超静定次数的确定提供了一种简单有效的数值算法。     

管式炉中半导体激光器巴条Au80Sn20焊料封装研究

为了提高半导体激光器的封装质量和效率,引入管式炉利用夹具进行批量封装。由于封装质量的好坏直接影响半导体激光器的输出特性和使用寿命,利用MOCVD生长808 nm芯片,重点分析了管式炉温度和封装时间对半导体激光器巴条双面金锡封装质量的影响。利用X射线检测、结电压、光电特性参数和smile效应测试手段,确定了管式炉封装半导体激光器巴条的最优封装条件,为以后的产业化提供了指导意义。     

Well‐posedness of initial boundary value problems on longitudinal impact on a composite linear viscoelastic bar

We investigate the correctness of the initial boundary value problem of longitudinal impact on a piecewise‐homogeneous semi‐infinite bar consisting of a semi‐infinite elastic part and finite length visco‐elastic part whose hereditary properties are described by linear integral relations with an arbitrary difference kernel. Introducing nonstationary regularization in boundary conditions and in the contact conditions, the well‐posedness of the considered problem is proved. Copyright © 2017 John Wiley & Sons, Ltd.     

多功能Hopkinson压杆型试验装置的研制与应用

对传统的Hopkinson压杆试验装置进行了改进和完善，除了用于材料的动态压缩以外，还能进行动态拉伸、绝热剪切、裂纹扩展速度测定、动态断裂韧性测试等．本文介绍了几种试验方法的基本原理，并给出了试验结果．     

考虑疲劳裂纹扩展三维效应的James—Anderson修正方法

James-Anderson方法是一种借助材料疲劳裂纹扩展速率性能来确定三维裂纹应力强度因子的重要实验方法。本文对James-Anderson方法中的疲劳裂纹扩展三维效应进行了分析，并对其进行修正。修正后的James-Anderson方法考虑了疲劳裂纹扩展中由于应力状态而引起的三维效应。研究结果表明：和James-Anderson方法相比，修正后的James-Anderson方法得到的应力强度因子和三维数值方法所得的应力强度因子更吻合。     

An optimisation method for separating and rebuilding one-dimensional dispersive waves from multi-point measurements. Application to elastic or viscoelastic bars

When using a classical SHPB (split Hopkinson pressure bar) set-up, the useful measuring time is limited by the length of the bars, so that the maximum strain which can be measured in material testing applications is also limited. In this paper, a new method with no time limits is presented for measuring the force and displacement at any station on a bar from strain or velocity measurements performed at various places on the bar. The method takes the wave dispersion into account, as must inevitably be done when making long time measurements. It can be applied to one-dimensional and single-mode waves of all kinds propagating through a medium (flexural waves in beams, acoustic waves in wave guides, etc.). With bars of usual sizes, the measuring time can be up to 50 times longer than the time available with classical methods. An analysis of the sensitivity of the results to the accuracy of the experimental data and to the quality of the wave propagation modelling was also carried out. Experimental results are given which show the efficiency of the method.     

Shear Failure of Inconel 718 under Dynamic Loads

Kinetics of deformation and fracture of nickel–iron alloy Inconel 718 under dynamic shear loading was measured using a split torsional Hopkinson bar facility and high-speed photography. Tubular specimens with a reduced gage length and a starter notch were sheared at strain rates up to 6 × 10³ s⁻¹. High-speed photographs of fiducial lines scribed on the specimen surface showed the development of local strains and cracking. This paper describes the experimental and analytical procedures, illustrates average and local plastic strain evolution, and presents shear crack initiation times and propagation speeds.     

Dynamic and Quasi-Static Propagation of Compaction Waves in a Low-Density Epoxy Foam

We conducted dynamic and quasi-static compression experiments with low-density (ρ = 120 kg/m³) epoxy foam specimens. The specimens had a 10.0-mm-square cross-section and a length of 19.3 mm. Dynamic experiments were conducted with a modified split Hopkinson pressure bar (SHPB), and the quasi-static experiments were conducted with a hydraulic load frame device (MTS-810). In both cases, the specimens were loaded from one end at a constant velocity. Equally spaced grid lines were marked on the specimens to monitor the deformation history. Digital images taken at equally spaced time intervals gave the positions of each grid line. These images showed that a constant end-face velocity V produced a compaction wave front that traveled at a constant velocity C in both dynamic and quasi-static experiments. We described these results with a shockwave analysis that used a locking solid material model.     

刚体撞块撞击弹性长杆的二次撞击分析

本文采用应力波特征线方法详细分析了刚体撞击固支的弹性长杆的撞击过程，指出当撞块质量和长杆质量的比值满足一定条件时，在第一次撞击过程结束后会发生第二次撞击。